How to Make a Simple Purse without a Pattern     -     April 1, 2017

Need a gift for a friend or family member?  Consider making the gift more special by making it yourself.  Search your stash for fabric to make a simple purse without a pattern.

The key is to think about the design and the order of the steps needed before you begin.  Most purses are made from rectangles or slight variations of the rectangles and can be made any size you desire.  They can be made with or without a lining.   You can use double sided quilted cotton, home décor fabric, corduroy, denim or almost any other fabric.  Most likely you will need a stabilizer.  You can use interfacing, quilt batting, fleece, or a foam stabilizer like Soft and Stable.  If you use double sided quilted cotton, you will not need a stabilizer.  You can use purchased double sided quilted cotton or make your own.  For the purse shown below, I made my double sided quilted fabric.  I used one layer of home décor fabric from my stash with a layer of quilt batting and one layer of cotton fabric. 

After I measured a purse I liked to decide what size I wanted, I cut 2 rectangles of the home décor fabric, the cotton fabric, and quilt batting.  I allowed ½ inch for seams.  Then I quilted the three layers together using cross hatching.  I did the same for the other half of the purse.

Next, I decided how many pockets I wanted on the inside and outside of the purse.  I wanted as many pockets as possible.  The key to adding pockets to both sides is to place them so they don’t interfere with each other.  A pocket on the inside will do you no good, if you sew over it when you place another pocket on the outside.  To avoid this, I made a deep pocket for the inside of the purse that was the width of the rectangle and sewed down the middle to divide the pocket into two sections.  Then I sewed across the bottom of only one section.   I folded the loose section out of the way and turned the fabric over to the outside.  Then I made a cell phone pocket and sewed down the side of that pocket closest to the middle dividing stitch of the inside pocket.    I did not sew across the bottom of the cell phone pocket because that was below the bottom of the inside pocket.   Then I turned over the fabric and returned to the 2- section pocket.   I folded the unattached section of the cell phone pocket out of the way.  Then I  folded the first section of the inside pocket into place and sew the bottom down.  I did not sew the sides of this pocket at this time because they would be eventually be sewn into the side seams.  After that I flipped the fabric over and sewed the bottom and left side of the cell phone pocket.    

My next step was to decide what order to sew pockets on the other purse piece.  I made a small pocket for the inside, so I installed that first.  Then I made a larger zipped pocket for the outside.  I placed the zippered pocket so the stitches did not cross into the area of the inside pocket.

I trimmed the sides of the purse to make it smaller at the top and a little larger at the bottom.  Then I installed the zipper and strap.  Next, I place right sides of the purse together and sewed the side seams and the bottom.  I squared the bottom and my purse was finished. 

Making a purse is easy and fun.  No pattern is needed.  You probably have fabric in your stash to make one.   Just cut rectangles for the purse body and for the pockets.  Attention to detail is needed to make sure the pockets are sewn in the correct sequence.  If you sew them out of order, you can always get you ripper and make corrections!   If you want more detailed directions, I posted the size of the rectangles I used and the sequence of steps including photos on my website, chickenlittlesews.com.  Just click on “tutorials”.

Have fun sewing!

Judy